Do-it-yourself small sauna made of 3x4 timber: detailed construction instructions!

The option to build a bathhouse from 3x4 timber with your own hands is a reasonable solution to get a place for relaxation and washing procedures in a limited space. Construction from lumber will not cause difficulties even for people without special skills. If you follow the sequence of construction stages, you can complete the work in 1-2 months, depending on the type of foundation.

Advantages of a bathhouse measuring 3x4 m

Building a bathhouse from 3x4 timber with your own hands is an undertaking that does not require large budget expenditures or the involvement of heavy construction equipment. With the help of a competent project and high-quality materials, 1-2 adult men can raise a structure in a few weeks.

Choosing a wooden block as a building material makes the process of assembling the box no more difficult than a children's construction set. The correct geometric shape makes it easy to construct elements into crowns. With reliable fasteners, construction of a high-quality foundation and insulation work, your own bathhouse will last at least 20 years with timely repairs and maintenance.

The construction of a bathhouse with dimensions of 3 by 4 m from timber material is characterized by the following advantages:

• The building area is only 13 sq. m. m with allowances for foundation protrusions and roof slopes;
• possibility of construction in limited space;
• a full-fledged building for washing and resting for 2 adults or 1 adult and 2 children;
• the ability to organize a separate steam room, washing room and dressing room;
• speed of construction;
• low consumption of materials;
• there is no need to install a strong foundation;
• It’s easier and faster to insulate, decorate, warm, and dry a small room.

The wood from which it is planned to build a mini-sauna complex on your own site is an environmentally friendly and affordable material. Thermal procedures in a room built from timber have a beneficial effect on the overall tone of the body, strengthen the immune system, have a healing effect on the pulmonary system and skin, and promote recovery from colds.

Successful examples and options

Today there are many companies that manufacture turnkey baths. Structural diagrams and calculations of materials for such structures can be used to create ideas for your own project. For example, a bathhouse on the site can be one-story with a small attic; you can arrange an attic that will serve as a guest room. But there is also the possibility of building a two-story bathhouse by arranging a full-fledged recreation room on the second floor with a billiard table, a music center and a large TV.

There is always the opportunity to build an option with a covered terrace on which to place a table with chairs for summer relaxation. It is not necessary to choose the 3x4 m option; there are many other varieties, such as:

• bathhouse 4x4 m;
• bathhouse with veranda 4x4 m;
• bathhouse 6x3 m;

• bathhouse with terrace 6x4 m;
• bathhouse with attic and terrace 6x9 m;

• bathhouse 6x6 m;
• bathhouse 6x9 m.

In conclusion, it can be noted that the construction of a frame bath can be done with your own hands at the dacha or in the courtyard of a private house. All that is needed for this is to prepare a construction project, stock up on all the necessary materials, prepare the necessary tools, and also study all the instructions and recommendations for construction. In this case, construction does not take much time, the result will please even the most picky owners and will become the envy of the neighbors.

To learn how to build a sauna with your own hands, see the following video.

Peculiarities

When building a compact bathhouse, use standard lumber - planed timber with a length of each product of 6 m. Manufacturers produce wooden products processed on four sides of this particular molding. When erecting walls 3 m wide, the timber will only need to be cut in half, which will speed up the construction process and make the work easier.

Important!

To comply with fire and sanitary safety, ensure the recommended distance from the facility to the adjacent territory and buildings. There must be at least 1 m between the fence and the bathhouse, and at least 15 m from neighboring buildings.

Before starting construction work and design, check out the photos of finished baths measuring 3 by 4 to choose the option that suits you. After choosing a building model, the design and construction stages will not be difficult. Due to the compactness of the bathhouse complex, carefully consider the layout of the premises, the location of the heating stove, window openings, and entrance groups.

Frame bathhouse with attic

A fairly large building with two floors, in which the second floor is occupied by a spacious lounge with a bed. If you wish, you can arrange the upper room differently - put a sofa and billiards.

Frame building with attic.

On the ground floor there is a steam room, a shower room, a small relaxation room with a staircase to the second floor and an open veranda. The dimensions of the external walls of the building are 5x7 m. Dimensions of the internal rooms:

• Steam room – 2.5x2.5 m.
• Shower room – 2.5x2.5 m.
• The room on the first floor is 5x4.5 m.
• The room on the second floor is 5x5 m.
• The dimensions of the veranda are 2x4 m.

The design of a frame bathhouse with an attic provides for a reinforced frame, compared to single-story frame walls. For this purpose, the number of frame supports has been increased while maintaining their dimensions of 150x50 mm. The above projects can be used both for doing the work yourself and for ordering a turnkey frame bathhouse from a construction company.

Bathhouse 3x4 m: basic information about the project

The construction of a dacha mini-complex is classified as the construction of outbuildings on a private plot and is regulated by the state-approved document SNiP 30-02-97. Study building and sanitary standards before choosing a place to build a structure to ensure fire and hygienic safety.

You need to build your own bathhouse on the most suitable territory. To do this, you need to analyze the following aspects:

• soil type. Choose non-swampy, flat areas for construction. The choice of type of foundation layer depends on the nature of the soil;
• depth of the aquifer. Assess the area after snow melts and when groundwater levels drop. The foundation must not be washed away;
• climatic features of your region. Analyze the freezing depth of the soil substrate, the threat of flooding and seismic activity to select a reliable foundation for construction that will ensure long-term operation of the building;
• location relative to other objects on a summer cottage or private plot. Draining water from a bathhouse, drawing water, heating requires compliance with sanitary and fire safety;
• electrification. The supply of electricity must be carried out from a common panel that supplies a residential or country house and other objects on your territory;
• harmony with the overall landscape of the site. Ensure that the building fits organically into the overall appearance of the territory, its appearance is combined with neighboring objects.

The architectural aspect of construction in the area where your site is located plays a big role. When constructing a bathhouse on residential land, it is necessary to coordinate the upcoming construction activities and obtain permission from state administrative bodies before the construction process.

Making walls

Before installing walls, you need to decide on the location of doors and windows. In a small bathhouse, racks are formed at the corners of the building. On the front and rear walls, which are longer, additional racks are installed in the middle. But they can be displaced due to the way windows and doors are installed.

Step-by-step procedure for constructing walls:

1. Install corner posts. In a vertical position, they are first fixed temporarily with slats, but strictly according to the level.
2. Place vertical racks on the sides. The lower parts of the side posts are secured with metal corners. Then this is the procedure for the front and back walls.
3. Additional reinforcing elements are installed in the form of beams. Boxes for windows and doors are formed according to size. There is only one door. There are one or two windows for the locker room. Small in size to prevent heat loss. The purpose of windows is ventilation.
4. All connections are reinforced with metal corners. It is recommended to use self-tapping screws instead of nails - it’s more reliable.
5. In the same way, the bases of the walls inside the bathhouse are formed according to their availability.
6. After the frame of the walls is formed, they are sheathed. Lining or OSB boards are suitable as cladding.

After covering the external walls, insulation is installed. To form the frame, a 10x10 cm beam is usually used, so the insulation should not be thinner. How to build a frame bathhouse with good insulation is to use mineral wool. Inexpensive material that is easy to seal cracks. They must be carefully closed; there should be no gaps. If you miss some connection without insulation, this will lead to a rapid loss of temperature inside the bath.

The vapor barrier is made of foil. The minimum thickness is 40 microns. The foil joints are connected with tape. The order of installation is from top to bottom in stripes. A stapler is used to secure it to the wood, but glue can also be used.

The template will make it easier to install the rafters. It is made of light boards and placed next to the installation site of each rafter. It is easy to avoid mistakes with such a system.

Instructions for forming the roof:

• Assembly is carried out on the ground for ease of operation and manufacturing accuracy. Then the finished structure is raised.
• Each part is installed in its own place above the central beam. Places must be marked in advance with a bright pencil.
• The roof must have ventilation holes. A sheathing is installed between the rafters and the counter-batten.
• It is easier to cover the gables with OSB boards - this will form a solid element.

Slate is the best roof covering. Roofing felt is not recommended because it tears quickly and easily. You can use metal tiles, it’s more aesthetically pleasing. But when it rains, metallic tapping will be heard.

Nuances of designing basic elements

A project for the construction of a small-sized bathhouse is one of the most important documents, according to which you can systematically carry out construction processes, calculate the amount of materials, obtain a construction permit, and register the constructed structure for cadastral registration.

Proper planning of a small-sized building will allow you to obtain a large usable area and provide for all the necessary aspects. At the design stage, it is necessary to take into account all the points in order to organize consistent construction without missing deadlines.

Project

Designing your own bathhouse is an important link in the chain of construction processes. Create a competent project yourself or take ready-made options. Complete your sketch using special computer drawing programs or draw it on paper. For the drawing, take millimeter or checkered sheets and draw according to scale.

The project for which construction work is planned will require the following types:

• lateral view;
• front view;
• view from above;
• sectional view;
• view in three planes.

On all projections, indicate the dimensions of all elements - foundation, walls, rafter system, location and dimensions of windows, doors, heating stove, shelves. A well-drawn project will help to accurately calculate the estimate and become a plan for completing the work.

Foundation

A timber structure with dimensions of 3 by 4 m does not require the organization of a powerful foundation. Wooden building with an area of ​​12 sq. m of timber weighs from 2 to 3 tons, depending on the stage of drying of the lumber and the weight of the roof. The foundation must ensure reliable immobility of the structure. This is the main condition that will increase the service life of the building.

To build a small-sized bathhouse, the following types of foundation are used:

• monolithic filling. Dig a rectangular pit on the site with a depth of 30-40 cm, a length of 4.5 m and a width of 3.5 m. Equip the formwork from boards at a distance of 20-30 cm above the ground surface, fill the bottom with a cushion of stove and gravel, organize drainage , fill the space with concrete using M200 or M250 cement. Depending on weather conditions, it will take from 2 to 4 weeks to dry the base;
• strip base. Organize the excavation of a trench for the bathhouse foundation, repeating the perimeter of the structure being erected, 30-40 cm wide and 30-35 cm deep. Put together a formwork structure from plywood or boards with the walls rising 20-30 cm above the ground surface. Equip a drainage drain or pipe drainage for cleaning water . Fill the formwork space with a mixture of cement, sand and water. Use a cement composition of at least grade M200. To strengthen the structure, use reinforcement, pour broken bricks, stones, and coarse crushed stones into the concrete composition. It will take up to 3 weeks to dry the foundation tape;
• block foundation. Level the site for construction, dig at the planned corners of the bathhouse, as well as in the middle of the length and width of the perimeter, recesses for concrete blocks. Fill the bottom of the holes with a sand and gravel cushion 10-15 cm high, lay stone elements, and compact with soil. Make sure that the level of all block racks is the same;
• pile-screw field. Make markings on the soil substrate for installation of screw support piles. Install screw-type steel supports at the corners of the building, as well as one post under each wall. When planning to build load-bearing walls inside the box, consider installing a screw pile in the middle.

Important!

At the stage of organizing the foundation for the bathhouse, provide for the removal of waste water from the washing compartment. The base must not be washed away.

When building a bathhouse with a heavy brick heating stove, consider pouring a separate foundation. In accordance with the project, make a mark on the ground in the place where the heating unit will be installed, dig a recess, organize pouring concrete formwork or placing blocks.

Walls

After the foundation work, begin constructing the timber box. Make a powerful tier on the base from timber of a larger cross-section than that used for the walls. Place a grillage on the pile-screw field.

Assemble the frame in the following sequence:

• lay a waterproofing layer (for example, roofing felt) on top of the foundation row;
• for the first crown, use a wooden block 200 x 200 mm or 300 x 200 mm. The first row will bear the heaviest load of the log house, so the use of thicker material is required. Treat the laid tier with antiseptics, impregnations that protect against fungus, rodents, and insects;
• lay walls from timber, collecting right angles or organizing removal. Please note that the added corner elements will require more lumber;
• between the tiers, lay insulation - jute tape or moss;
• secure the rows together with dowels;
• To save money, immediately take into account the location of windows and doors.

The standard height of the box must be at least 2.5 m. The number of rows of timber depends on the selected section of lumber. To assemble a 3 x 4 log house you will need at least 6-7 cubes.

Partitions

Partition structures that delimit rooms inside a log house can be made from wooden blocks of a smaller cross-section, boards, or using frame technologies. The bath space should be divided into:

• dressing room or rest room (2 by 2 m);
• washing room (1 by 2 m);
• steam room (2 by 3 m).

There is no need to construct additional load-bearing walls due to the small size of the building. The construction of solid partitions will reduce the usable area. Divide the space inside the bathhouse in compliance with tightness and fire safety to ensure complete washing procedures with rest.

Roofing system

For a small bathhouse, you can build a roof with one or two slopes. For construction, you will need an unedged board with a thickness of at least 5 cm for installing rafters, lumber of at least 2 cm for organizing the sheathing.

Install the roofing system as follows:

• Build rafters above the log house in increments of 0.7-1 m;
• Install a sheathing on top of the rafter elements, laying boards every 25-30 cm;
• secure the rafter spans with crossbars;
• lay a waterproofing layer on the sheathing;
• Lay roofing materials (slate, ondulin, corrugated sheets, tiles, etc.) on top of the waterproofing.

Provide an outlet for the chimney pipe in the roof. Equip all elements of the rafter system with reliable metal fasteners and corners. When installing roofing material, use hardware with polymer washers. After shrinking the frame, sew up the gables with boards or OSB panels.

Floors and ceilings

After assembling the box and erecting the rafter system, proceed to laying the floor. For high-quality insulation and tightness, you will need to build logs, a subfloor and a finishing coating. Provide for drainage of waste water in the washing compartment. Install a drainage ditch or pipeline under the washing area to remove wastewater from the structure.

Assemble the floor in the following sequence:

• on the protrusion of the lower tier, in specially cut recesses, lay logs with a thickness of at least 5-7 cm and a pitch of 0.5-0.7 m;
• lay a rough board under the joists, forming a continuous covering;
• lay waterproofing over the subfloor;
• put insulation (stone wool, polystyrene foam boards, etc.) in the spans between the joists;
• sew up the insulating layer with waterproofing;
• Finish with a planed floorboard.

In the washing compartment, provide a cover that reliably protects wooden materials from waste water. You can make a concrete screed under the final flooring. When covering the floor with washable tiles, arrange a slope of 3-5 degrees with the collection of wastewater into the pipeline.

Construct ceilings immediately with an insulating layer. Place logs on the top crown, and sew them up with clapboard from the inside of the room. Cover the top of the finishing in the attic with a layer of waterproofing, lay fireproof insulation on top, and cover it with a waterproofing layer. Place an unedged board on top of the insulating “pie”. Cover the smoke exhaust pipe with fire-resistant materials.

Windows and doors

Install entrance groups and window frames after shrinking the assembled box. It will take at least 1 year to completely dry the timber and stop deformation processes.

For a small bathhouse, you can install a window only in the washroom with dimensions of 50 x 50 cm or in the recreation room with dimensions of 70 x 70 cm. Due to the low temperature in the washing room, it is possible to use PVC structures. Wooden window elements will need to be treated against moisture. It is not advisable to install windows in a steam room due to the possibility of heat leakage.

Important!

When installing window frames and door structures, use fireproof foam to fill voids.

Install doors between rooms from solid aspen or larch. Use door handles with wooden linings to eliminate the risk of burns when touching metal elements. The bathhouse will require an entrance door (wooden or metal) and two entrance groups for a washing room and a steam room.

Bake

To heat a small wash room and steam room, you will need a small heating stove heated with wood. Choose compact options to get more usable space, ensure fire safety and avoid burns. Provide proper removal of smoke from the room.

For a bath measuring 3 by 4 m, you can install:

• a brick oven with one wall removed to the washing compartment. To build a heating structure made of bricks, the foundation will need to be poured in advance;
• homemade stove from a barrel. The unit inside must be divided into compartments for combustion, smoke removal, water heating, and ash collection. When using bricks inside a structure, consider constructing a free-standing foundation;
• a finished metal stove made of steel or cast iron. Installation of factory models does not require installation of a base.

A sauna stove must perform several functions - heat the room, water, stones to create steam. Depending on the option chosen, provide fire protection for wooden elements. A flood sheet must be installed in front of the stove, and the walls adjacent to the structure must be covered with asbestos or metal. For the chimney, choose stainless steel pipes.

Where to begin

Before you start creating a frame bath project, you need to decide on some important points that will allow you to plan everything more productively:

The steam room can be either built-in or free-standing, so you need to decide how it will look in your bath. Decide on a place to build

This is important to do at the initial stage of construction, since building a bathhouse involves laying the necessary communications. Often, the owner chooses a place for a bathhouse in accordance with the convenience of installing utility lines from the house there, so as not to complicate his life with autonomous circuits. Find out the type of soil in the area you have chosen for the bathhouse

Accordingly, you will need to choose a suitable foundation. Consider such points as, for example, the number of floors, the presence or absence of a veranda (terrace), attic (attic). As for the internal filling of the bathhouse, it is important to determine in advance the place for the heater stove, since the location and structure of the chimneys and ventilation outlets depends on this. Decide on the type of future roof. It can vary not only in appearance, but also in accordance with the structure of the roof. The massiveness of the floors and rafters depends on the choice of roofing.

Experts say that after determining the above-mentioned main nuances, you can begin to work on drawing up an individual project for a frame bath or choosing a project from a photo. As construction progresses, you will adjust your design, but the more accurate it is initially, the fewer problems will arise during the process.

If this stage seems too complicated for you, you have the opportunity to order a frame bathhouse project inexpensively from specialists. On the pages of the websites of specialized companies, there are many options for already developed frame bathhouse projects in the photo. If none of them suits you, the companies will give you the opportunity to order a unique project in accordance with your tastes and preferences.

Materials for building a bathhouse

To build your own mini-sauna complex you will need the following materials:

• materials for the base (concrete, formwork, brick, blocks, screw piles) depending on the selected type;
• a block of wood with a cross section of 20 x 20 or 30 x 30;
• wooden beams for walls with a cross section of 15 cm;
• lumber for partitions - a block with a section of 10 x 10;
• logs for the floor, rafters and ceiling with a thickness of at least 5 cm;
• unedged board for the subfloor, sheathing and ceiling, at least 2 cm thick;
• waterproofing;
• insulation material (stone or mineral wool, polystyrene foam, fiberglass, etc.);
• lining for interior decoration;
• edged boards for floors, ceilings, installation of shelves;
• 1 entrance and 2 internal doors;
• window;
• fittings (hinges, handles, latches, locks);
• fasteners (pins, nails, screws, rubber washers);
• metal sheet for fire safety;
• electrical wiring protected from moisture;
• heat- and moisture-resistant lighting fixtures;
• antiseptic;
• polyurethane foam;
• jute or moss for insulating a log house;
• roofing materials.

Wooden materials for high-temperature rooms should not release resin. Choose aspen lumber for finishing the steam room. Use coniferous wood in the wash room or rest room.

Finishing

A frame bath should not only be strong, reliable and durable, but also beautiful. To give the object the necessary external qualities, appropriate finishing work is carried out. It is recommended to cover the outside of the frame bathhouse with boards made of hardwood. Place a layer of moisture-proofing material and insulation under the sheathing.

Bathhouse finishing with wood

The internal lining of the bathhouse will provide additional protection of the building elements from adverse influences. So, the same OSB is suitable for assembling a rough ceiling. Attach them to the floor beams on the room side. Coniferous lining is perfect for interior wall cladding.

The heart of any sauna is the stove. The installation of this element must be carried out in accordance with fire safety requirements. As a rule, a standard system is used, according to which a heating boiler is placed in the dressing room, and a heater stove is installed directly in the steam room.

Divide the resulting frame structure into zones in accordance with the previously prepared project. Select the material for partitions in accordance with the conditions of a particular room. For example, a billiard room and a recreation room can be separated even by ordinary plasterboard partitions made of moisture-resistant sheets.

Those walls that will be exposed to moisture and/or high temperature must be laid out of more resistant materials, usually brick. Cover the partitions with clapboard, blockhouse or other similar material. Cladding will give the walls a more attractive appearance.

Frame bathhouse - the most suitable solution in modern conditions

Thus, there is nothing complicated in building a frame bathhouse yourself. Having spent relatively little money and time, you will get a reliable, safe, durable and generally excellent design in terms of its performance properties.

Good luck!

Work order

Consistent execution of construction processes is necessary to obtain a reliable structure that will last at least 20 years. Check out the step-by-step construction of the bathhouse in the video, which shows the main points of the construction of the structure.

The process of building a bathhouse consists of the following important steps:

• drafting;
• obtaining permission to construct a facility (for construction work on urban lands);
• calculation of construction materials estimates;
• purchasing everything necessary;
• preparation and marking of the territory;
• arrangement of a drainage pit or wastewater disposal structures;
• organization of the foundation, including for a heating stove;
• assembling a box from timber;
• construction of a rafter system;
• roof installation;
• building shrinkage;
• installing doors, windows, installing a stove;
• electrification works;
• construction of shelves, static structures;
• finishing activities.

Consistent implementation of all activities will allow you to independently build a small bathhouse for comfortable relaxation and washing procedures in a short time. Pay attention to every step to satisfy all requests. Subsequently, you can add a veranda, porch, or terrace to the structure.

Important points

Before starting all construction work, the design of a 3x4 frame bathhouse (and any other as well) must contain a number of technological and construction solutions.

• Thermal insulation. High-quality measures for sealing and insulating the bath will guarantee good air exchange. For these works, fiberglass or mineral wool is most often used, because they have excellent characteristics;
• Vapor barrier. The main disadvantage of frame construction is the appearance of condensation. This is explained by the fact that moisture penetrates into the frame through cracks during rains and snowfalls. Therefore, in order to avoid such a phenomenon, you need to carry out this stage of work well.

A good solution would be to use a vapor barrier film or glassine; they are placed between the layer of inner cladding and insulation. Experts do not recommend using roofing material, since when heated it emits an unpleasant odor;

• Choosing the right wood. Only good dried boards are suitable for construction work. Aspen, larch and linden are ideal for these tasks.

They have a low thermal conductivity and are almost not deformed. The lining itself must be without flaws and of the highest quality.

Foiled mineral wool

Room layout

Since 4x3 meters is not so much, it is difficult to place all the necessary rooms in such an area

First of all, you should pay attention to the most necessary premises:

• Waiting room. This room is considered an integral attribute of the bathhouse. But at the same time, in some cases this room is sacrificed to save space. The purpose of this room is to leave all your belongings, shoes, etc. in it. Essentially, this is a room that functions as a locker room.
• Washing room. The sink is a room that you need to enter before moving into the steam room. Usually there is a minimum of furniture in it - only neat benches. In some cases, the interior of the room is also complemented by shelves.
• Steam room. The most important room in any bathhouse is the steam room. After all, this is where all the main processes take place. Often inside this room there is a stove or fireplace. In addition to them, there should be many other little things in the room. First of all, these are lounge chairs and shelves.

To understand what you should focus on when arranging a bathhouse, you can consider several interesting layout examples:

A simple two-room option. To save space, you can opt for a regular bathhouse, consisting of two rooms - a steam room and a dressing room. The plan for such a building is very simple. The bathhouse space is divided into two main rooms: a steam room and a dressing room. There is a place to store things in the dressing room. If necessary, you can also place a table with chairs there to relax with company during the cold season. At the exit from the bathhouse it is worth setting up a terrace where chairs can be taken out in the summer. As for the steam room, for convenience it is divided by a partition into a steam room and a sink. In this situation, inside the bathhouse there will be a place for everything you need and there will be no unnecessary parts.

Insulation

The following can be used as insulation:

• tow,
• moss,
• jute.

It is more convenient to use rolled jute, which is unwound over the beams and attached to them with nails or a construction stapler. The advantage of jute is that there is no need for caulking.

Insulation process

If tow or moss are chosen as thermal insulation, then after the log house shrinks (6 - 7 months), the cracks between the crowns must be caulked. To do this, during the installation of insulation, a few centimeters of reserve are left, extending beyond the edges of the log house.

After the moss or tow has dried, they are first twisted into a rope and, using a hammer and caulk, pushed into the gap between the crowns.

Where to buy a mini-sauna inexpensively and turnkey price

The cost of building a bathhouse depends on many factors. First of all, the price of construction depends on the materials and equipment used, as well as the cost of delivery and the location of construction. It will be convenient to order a mini-sauna for your dacha based on a ready-made project, buy it disassembled and assemble it on the site. The cost of the building itself depends mainly on the size and configuration. The average prices for purchasing a bathhouse are equal, so you should choose a contractor based on reviews of the qualifications of the workers and the quality of the work performed by this company.

From the presented table it can be seen that you can purchase a turnkey bathhouse for your dacha inexpensively, but you should take into account the delivery of the material to the construction site. In addition, the price of the building does not include the foundation. Work on the construction of a strip foundation costs an average of 10,000-12,000 rubles. But there is a possibility of saving the construction budget by installing a columnar or pile foundation.

You can separately order a sauna for your dacha, buy an inexpensive stove and sauna equipment. This option is advantageous because it allows you to choose equipment to suit your tastes.