Corner bath projects: features, advantages, types, layout options and photos

A bathhouse on your own site is an opportunity to go to the steam room whenever you want. Bath procedures are good for health, they strengthen the body and improve mood, which is why an increasing number of people are planning to build a bathhouse on their property.

Recently, there has been an increase in the popularity of corner baths.

Advantages of a bathhouse with a terrace, veranda

A veranda is a small open or closed structure with a roof.
It is part of the bath structure, located on the same foundation. The veranda is built together with the bathhouse or later. The terrace has its own foundation, another foundation raised above the ground. Such a platform is closed, open, universal. The latter option is suitable for full use both in summer and winter. A bathhouse with a veranda or terrace has many advantages:

• on the area in front of the bathhouse you can organize barbecue, barbecue, and grilling;
• friendly gatherings, family lunch or dinner are also convenient here;
• a huge selection of modern building materials and design solutions allows you to create a building in any style;
• the extension can be located either on the side of the bathhouse or between the house and the bathhouse, so that you can relax without going far;
• plants in tubs and flowerpots will be beautifully placed on the site;
• competently executed construction allows you to comply with the chosen concept of landscape design as much as possible, without making the architectural ensemble disjointed;
• since there is no need to build a separate roof over the recreation area and the washing area, as well as to connect them with paths, the savings in time and building materials are obvious;
• from the open terrace or veranda you can admire the sunset or sunrise over a cup of tea, wrapped in a soft blanket;
• The outdoor pool can easily be located right on the terrace.

Dimensions

In compact baths (up to 10 square meters), there is no point in installing a full-scale veranda, since it will be approximately the same size. It is better to replace the veranda with a summer kitchen - then the bathhouse will play the role of an extension.

On average, a good veranda has an area of ​​6 square meters. For those new to construction, it is better to build a bathhouse from 6x6 logs with a veranda of the correct shape. Visually, the bathhouse is divided in half - one part will be a relaxation room and shower, and the second will be a veranda and steam room.

An interesting location option is when a door leads from the veranda to the recreation room, located next to the summer kitchen.

From the rest room there are doors leading to the bathroom and steam room.

The veranda does not necessarily have to have any purpose; sometimes it is erected as a convenient approach to the door.

The area of ​​a large-scale veranda can reach 55 square meters.

But you can arrange whatever your heart desires - grills and barbecue ovens, a table with benches, or even a real flower garden.

The place allows you to divide the veranda at your discretion, including into an open and closed part. This is very convenient if you want to cook food outdoors, but under a roof, while being able to shelter from the wind. For such purposes, the steam room 3 2 and the veranda are excellent.

3x3; 3x2; 3x6; 4x6; 6x6; 5x6

The simplest designs of compact baths (up to 36 square meters) have a regular geometric shape of a rectangle or square, for example 3 by 3 with a veranda or 5 by 5 with a veranda. This is convenient because you can divide the rooms and arrange them as you wish.

Information. The veranda is always located in front - where the entrance to the bathhouse is. The part from the porch to the entrance is left unchanged so that you can walk without touching the furniture. Windows can be of any size, but no less than 50 by 50 cm. It is most pleasant when the windows are large, almost the entire wall - this way you can enjoy the beauty of nature.

A universal option is a 6x6 steam room with a veranda. There is a vestibule between the veranda and the rest room. Its dimensions rarely exceed 2 square meters, and no more is needed - this is enough to save heat. Then there is the relaxation room - one of the largest rooms in the bathhouse.

Its area directly depends on how many people can be in it at the same time - each person must have at least 1.5 m of free space. The windows are located at a height of 1.7 m from the floor, so that no one worries that everything can be seen through them to strangers. This layout is typical for 3x6 buildings with a veranda.

Doors lead from the rest room to rooms with high humidity.

We are talking about a bathroom, steam room and shower room

In the washing room and bathroom, the windows are located almost under the ceiling, if their presence is provided.

But in the steam room the windows should be large, since the use of electricity is not recommended there.

Instructions for building a corner bath

With the foundation ready, corner baths made of timber are erected as follows:

Bottom line

From all of the above, we can conclude that a corner bathhouse with an attic or gazebo can be built independently, but you will have to put in a significant amount of effort and time (read: “Which bathhouse designs with a gazebo under one roof are right for you”). However, doing the work yourself reduces construction costs. Naturally, if you have no desire to create, you can order construction from specialists who will take responsibility for all stages - from purchasing the necessary materials to their installation and putting the bathhouse into operation.

Additional services

• Replacing timber 150x100 mm with timber 150x150 mm RUB 28,000.
• Replacing timber 150x100 mm with timber 150x200 mm RUB 54,000.
• Wood-burning stove Ermak from RUB 32,000. (more details)
• Increase the height of the bathhouse by one crown (+15 cm) RUB 16,000.
• Construction of partitions from timber (150x100 mm) RUB 22,000.
• Coating of joists and subfloor (as a gift: promotion until February 15) 400 rub/m²
• Replacing a 27 mm floorboard with a tongue and groove board 36 mm thick 380 RUR/m²
• Metal entrance door (China) 7,000 rub.
• Bathroom insulation up to 100 mm 350 RUR/m²
• Warm corner (as a gift: promotion until February 15) RUB 24,000.
• Assembling a bathhouse on wooden dowels RUB 24,000.
• Cladding the stove with bricks (as a gift: promotion until February 15) RUB 8,000.
• Construction shed 3x2 m. 16,000 rub. (more details)
• Roofing (metal tiles)590 RUR/m²
• Finishing the gables of a block house RUB 1,200/m²
• Generator rental (customer’s gasoline) RUB 9,000.

Two-story bathhouse made of laminated timber 94 sq.m.

Buildings made of laminated veneer lumber are distinguished not only by their reliability, but also by the high speed of assembly of the structure. By ordering the construction of this project, you will be able to enjoy the procedures on your own site in the shortest possible time.

The two-story bathhouse with a separate boiler room is very convenient and designed, first of all, taking into account the comfort and hygiene of visiting the steam room and living in the house.

The first floor contains all the main rooms, including a toilet room, kitchen and living room, and the second floor is ideal for a bedroom. Thus, this building can perfectly perform not only its main functions, but also serve as an excellent place for a small family to live.

Design and drawing

Distribution of internal space in 6x6 buildings:

• vestibule - 4 m2;
• washing room - 4 m2;
• steam room - 4 m2;
• dressing room - 16 m2.

If there will be more than three visitors, it is recommended to make the rest room smaller and the functional areas larger.

Distribution of internal space in a building 8x10 m:

• barbecue veranda - 17.1 m2;
• bathroom - 1.4 m2;
• washing room - 9.5 m2;
• vestibule - 1.7 m2;
• steam room - 8 m2;
• rest room - 9.4 m2.

Distribution of internal space in a building 10.7x7.6 m:

• steam room - 7.1 m2;
• relaxation room - 9.5 m2;
• bathroom - 2.1 m2;
• terrace - 16 m2;
• vestibule - 2.2 m2;
• washing room - 7 m2.

You can expand the free space by adding a terrace to the free corner and an attic above the bathhouse.

Steam room (Photo: Instagram / ermak_stoker_official)

Additional services

• Replacing timber 150x100 mm with timber 150x150 mm RUB 28,000.
• Replacing timber 150x100 mm with timber 150x200 mm RUB 54,000.
• Increase the height of the bathhouse by one crown (+15 cm) RUB 9,000.
• Construction of partitions from timber (150x100 mm) RUB 9,000.
• Installation of a sandwich pipe through the roof RUB 8,000.
• Sandwich pipe set RUB 16,000.
• Replacement of floorboards with tongue and groove boards 36 mm thick 280 RUR/m²
• Metal entrance door (China) (as a gift: promotion until February 29) 7,000 rub.
• Bath insulation up to 100 mm 250 RUR/m²
• Warm corner (as a gift: promotion until February 29) RUB 24,000.
• Assembling a bathhouse on wooden dowels RUB 24,000.
• Cladding the stove with bricks (as a gift: promotion until February 29) RUB 8,000.
• Construction shed 3x2 m. 18,000 rub. (more details)
• Roofing (metal tiles)590 RUR/m²
• Finishing the gables of a block house RUB 1,200/m²
• Generator rental (customer’s gasoline) RUB 9,000.
• Coating of logs (as a gift: promotion until February 29) 400 RUR/m²

Two-story bathhouse made of timber

Buildings made from rounded logs turn out to be quite expensive and require serious investments to maintain the log house in good condition. High humidity and bath temperature, even with good waterproofing and ventilation, cause many problems. It’s a different matter if you choose a bathhouse project made from laminated veneer lumber for a two-story building.

A box with a small attic will cost quite cheap, only abandoning the strip foundation will save at least 20 thousand rubles. The planning of the interior is practically no different from the previous version. On the top floor there is a relaxation area, the first floor is reserved for a steam room, shower and toilet.

Corner bathhouse with terrace and barbecue, project of a two-story bathhouse made of timber

Comfort, practicality, functionality - these are the common features of any two-story corner bathhouse projects. Increasingly, not ordinary bathhouses with the obligatory waiting room, washing room and steam room are being built on land plots, but real full-fledged houses: presentable, stylish, capable of decorating any landscape. The structure is made of rounded logs - pleasant to the touch, perfectly smooth and even - looks like a fairy-tale house.

Two-story baths - profitable and beautiful

What is the main advantage of building two-story baths? First of all, this is, of course, the presence of additional space on the second floor. You can arrange the attic room to your own taste, making it an office, a billiard room or a recreation room. This will also save space, because the construction will move upward, and not “spread” throughout the entire site. It is possible to build such a structure even on a site that does not have a large area.

Also, this design provides an excellent opportunity to build a house and a bathhouse at the same time, while you will spend a significantly smaller amount on construction. Thanks to the heating of the first floor, the attic is heated, where the chimney will be located.

You can even live or receive guests in the finished two-story bathhouse. In any case, such a building is beneficial not only from an aesthetic, but also from a material point of view. With a minimum occupied space, you can compactly arrange a maximum of rooms for different purposes, from a billiard room to a workshop. After you decide on the functionality of the rooms, you can choose a suitable layout option. By the way, projects of two-story baths are often complemented by a warm pool equipped inside. You can expand the functionality of the structure using a veranda, gazebo or terrace

When choosing a project, take into account factors such as:

• the number of people who will simultaneously use the bath complex;
• required area and functionality of premises;
• location and number of existing buildings;
• the type of soil on the site - the type of foundation will depend on it.

Construction of two-story baths

Wooden two-story baths are built from glued or profiled timber, as well as from logs. It all directly depends on your financial capabilities and aesthetic preferences. The cost of the structure in most cases directly depends on the chosen material. In any case, the consumer characteristics of the log house are extremely high: the tree, regardless of the processing method, retains heat perfectly, shows resistance to temperature changes and humidity, and has a long service life.

Of course, there are a number of differences. So, for example, building a bathhouse from timber is easier and faster than a similar one, but from logs. Also, the construction of the former is cheaper, since the technology for manufacturing the materials is not complex and expensive. Log buildings are distinguished by their comfort and quality. It is very easy to breathe in such a bath both in summer and winter: after all, the walls are a natural air conditioner, they are able to “breathe”.

Rounded logs with a profile, precise and neat interlocking connections make it possible to build strong, perfectly smooth walls with excellent thermal insulation properties. Another advantage is that you no longer have to think about finishing. Baths with an insulated second floor in the form of an attic have the following advantages:

• the construction of an attic floor will be 30% cheaper compared to a full second floor;
• sloping roofs, stairs, windows allow you to create a more original design for the attic space;
• provided that there is high-quality waterproofing and vapor barrier, the use of an attic is extremely profitable.

As you may have noticed, building a bathhouse with a second floor has its advantages. You will be able to get a functional building that will not take up much space on your plot of land. You can also use such a building not only for its intended purpose, but also as a guest house, which is very convenient.

How to build a house with “Russian construction”

First of all, you should contact the company.
A catalog of projects for corner (L-shaped) frame houses will help you make your choice. After signing the contract, you can calmly monitor the progress of the work. The required quantity of material is delivered to the site. The shift allows the company to expand its service geography. Nobody is interested in living for a long time in difficult conditions. The building is being erected quickly. In addition, frame construction itself belongs to the category of prefabricated technologies.

In this case, additional time will be required for interior and exterior finishing, installation of floors, placement of communications, installation of doors and windows. But the client will receive the keys to the house completely ready. You can place furniture and live. A frame house is not subject to shrinkage. You don't have to worry about wall decoration.

How to choose a suitable option for your own home? There are so many architectural plans to choose from, and sometimes it can be difficult to find the one that's right for you. In some cases, designs for corner houses with an attic may be optimal, and sometimes you have to order an individual house design. When are they in demand? Let's look at the main reasons.

Difficult landscape. If the site includes mountains, cliffs, or the client has the intention of preserving natural features (trees, ponds), then it is necessary to plan just such buildings.

Constraints due to urbanization. The infrastructure surrounding the site and various buildings mean that government agencies may be required to comply with certain standards.

Design specifics. A creative building plan can include aesthetic refinements that involve corner solutions.

What can you say about the varieties? Firstly, buildings can have both an internal corner and an external one. Secondly, they can have one or several floors.

Advantages:

• Conditions for convenient interior planning.
• The possibility of erecting a common roof, which simplifies the operation of the house and reduces construction costs. You can effectively use the common space of the attic.
• Even a large cottage will look compact on the site and not seem bulky, while the corner layout will provide protection from the wind.

There are also relative disadvantages:

• Projects of corner houses with an attic imply a slight increase in construction costs compared to rectangular houses. This is due to the fact that the perimeter of the external walls is larger.
• Residents of a corner building will also have to pay a little more for heating, since an increase in the length of the walls means a corresponding increase in heat loss.

In most cases, corner house projects have one floor. But depending on the requirements and desires of the customer, it is possible to build a house with several floors. Typically, such buildings are chosen by owners of large families or those who need large space and an abundance of rooms. The layout of a corner house may include an attic, a terrace, and, if there are several floors, balconies

Before starting the design and construction of corner buildings, it is important to pay attention to a number of features. In order for there to be enough light in a corner house, it is necessary to correctly orient the building relative to the cardinal directions. And in order to preserve heat, it is important to take into account the wind rose

And in order to preserve heat, it is important to take into account the wind rose

Project of a bathhouse with a relaxation room and a terrace

If both the means and opportunities allow you to build a large structure, then you can successfully choose a bathhouse design with a relaxation room and a terrace. This design is more practical and more popular. After all, the terrace for its intended purpose can only be used in the warm season. An additional room indoors, warm, allows you to use the bathhouse at any time of the year with great benefit.

Such a project has the following advantages:

• the opportunity to relax in the warmth;
• no annoying flies and mosquitoes;
• in the recreation room you can install some household appliances: refrigerator, TV, stereo system;
• here you can arrange a minibar and a bar counter if the room is used for frequent relaxation with friends.

Project of a bathhouse with a relaxation room and a terrace

There are no major disadvantages in such projects, but one can note the need to significantly increase the area of ​​the entire structure, which entails large energy costs.

In order to be able to allocate part of the area to a recreation room, it is necessary to provide for this opportunity immediately during construction. A classic bathhouse consists of a steam room, a wash room and a dressing room. Previously, the dressing room was most often a plank unheated room used for changing clothes. Various bath utensils were also stored in it: basins, brooms, ladles.

There is a small kitchen on the bathhouse terrace

Today, a rest room is being installed instead. It has common main walls with the main premises of the bathhouse. Taking on the functions of a dressing room, this room also plays the role of a place where you can relax, sit at the table, drink tea and talk with friends. In the summer, you can go out from the relaxation room to the terrace to enjoy a fresh breath of air after a hot steam room. It is not surprising that bathhouse designs with a relaxation room and a terrace are the most popular.

An example of a bathhouse made of rounded logs

Creation of one-story log cabin projects

The construction of one-story baths is relevant, therefore modern engineering technologies are characterized by constant development. Making design decisions for the construction of one-story buildings ensures the arrangement of cozy and functional buildings that are quite compact. A comfortable bathhouse with a terrace should take up more space, as it is a decoration of the landscape. The area they occupy is not at the expense of the main building.

Typical one-story baths usually have 3 rooms:

• shower;
• rest room;
• steam room

Each of them has an area that influences the layout of the bathhouse with a veranda and terrace. Bathhouse designs with a terrace may include an enclosed porch, which is a feature of one-story buildings.

Usually it can be used as an additional room, allowing you to relax during the cold season. The project of a bathhouse with a terrace and barbecue will be a budget option.

A separate structure must function regardless of the extensions to it. Many projects of one-story bathhouses made of timber with a terrace provide for additional space for relaxation during the warm season. Terraces are often surrounded by railings, and their area allows for the placement of light wicker furniture, which provides a comfortable, full-fledged place for leisure.

The construction of one-story baths as a guest building is required for frequent accommodation of guests on the territory of the personal plot. This type of building can perform a large number of functions, which is acceptable for hospitable owners. A built-in veranda or terrace of a certain type can be equipped as a kitchen. The rest room can be used as a living space, which is a full-fledged area providing leisure time in comfort.

Features of the corner layout

The corner bath project provides for a specific location and distribution of internal volume. The classic looks like this:

• The rest room and the steam room are connected at an angle of 90 degrees;
• The heater stove is located in the center of the projection and has a through type with a long combustion tunnel, which allows the most efficient use of its thermal energy to heat almost the entire internal volume;
• Very often, premises of this type are equipped with not one, but two doorways, providing communication with the outside world. On the one hand, this is convenient, on the other hand, it makes you think seriously about heat preservation issues;
• Finally, in general terms, the structure has an L-shape, which is why, in fact, it got its name.

What are the advantages

The L-shaped projection provides several very significant advantages relative to the traditional layout, in which the shape of the structure has straight sides:

1. There is a great opportunity to rationally use the area of ​​the site. As a rule, the corner sectors of the yard are not fully in demand. One has only to place a bathhouse in the corner connection, and immediately, just like in the old joke, there is also a lot of space for “still under the giroki”.
2. Imagine that you have a two-century-old luxurious oak tree on your property. Conscience does not allow you to cut down a tree; the lack of space does not allow you to build an ordinary classic bathhouse. A corner bathhouse solves the problem not only effectively, but also damn elegantly. The bathhouse wraps around a tree, and we have a gorgeous composition that, all other things being equal, we should also look for.
3. Take a look around. Quite often we have standard baths, as if from an architectural incubator, which seem to be attached to a simple and uncomplicated geometric figure - a rectangle. A little diligence and you are building a non-standard beauty, from which the chief architect of the district himself will draw ideas and inspiration for a long time.
4. The central placement of the stove opens up new opportunities for interesting interior solutions, and the heating of the internal volume itself becomes more uniform, and, as a result, efficient.
5. The concept of two separate entrances will allow you to implement interesting solutions, for example, placing a separate barbecue area, all under one roof.

What are the disadvantages

It is well known that there are no ideal architectural solutions, just as there is no general construction concept for all occasions. Corner bathhouse projects, unfortunately, are also not without a number of disadvantages, which are worth talking about in more detail:

• Compared to a traditional bathhouse of a simple geometric shape, such a structure is characterized by a slightly higher, in the range of 15 - 17%, consumption of building materials;
• For an inexperienced designer it is more difficult to calculate, and for an inexperienced builder it is more difficult to implement in reality a reliable design for the closure of two internal volumes. This primarily concerns the roof. It is not easy to securely tie a rafter set in a perpendicular projection without sufficient experience;
• Multiple exterior doorways are certainly easy to use. However, it is worth taking care to implement a number of measures aimed at maintaining heat in your bathhouse. Here it is worth using either very high-quality door systems, which is expensive, or duplicating vestibules, which, you see, is troublesome;
• Now about the oven. Its central location is a definite plus. However, be prepared for additional costs. In order for such a stove not only to justify itself, but also to work highly efficiently, a long combustion tunnel is needed. To implement such structures as air, you need a qualified master stove maker, with a head, hands and conscience, and a good choice of refractory. Cast and welded metal furnaces of this type are also far from a budget option.

If you have weighed all the pros and cons, and the positives from implementing a project of this type outweigh all the disadvantages, then we smoothly move on to the projects themselves. Which to choose?

Bathhouse with veranda under one roof

We propose to introduce the following division: first, let's talk about the terraces, which fit into the quadrangular plan of the bathhouse at the design stage, and then move on to extensions, which can have different shapes and be more or less connected to the main structure.

So, the terrace included in the plan is most often located in front of the entrance, occupying the entire space along the width of the front part of the building, but there may be other options for its location depending on the designer’s imagination.

The roof over such a terrace can either be a continuation of the bathhouse roof (most often), but it can also be a separate canopy. Unfortunately, calculating rafters is not such a simple task that you can devote a couple of paragraphs of text to it.

IMPORTANT! The roof must be calculated and installed by a professional. Read books on roof calculations - see for yourself

Those who would still like to try their hand can start with a lean-to over a barn, for example.

The veranda can be positioned on the side of the pediment; in this case, we will be talking about extending the ridge and rafter system beyond the walls, supported by pillars.

The second option is along the roof ridge. In this case, the length of the rafters increases, a long overhang is made, also supported by pillars.

There is also a third option, when the veranda, located perpendicular to the ridge, has its own roof, which fits into the rafter system of the bathhouse using undercut rafters.

We have already talked about the foundation - the cheapest way to make it is columnar, but other types of foundations are also suitable. And since we are talking about a veranda inscribed in a rectangular plan, you can make a single strip for the entire structure or in the form of a solid slab (when a floating one is needed).

ADVICE! The depth of depth for the foundations of the bathhouse and terrace should be the same.

One way or another, an open veranda consists of a roof, floor, support pillars and light fencing. There's nothing else there. If, of course, it is open.

With glazed

A bathhouse with a glass veranda under one roof is already a room in which you can stay even in the cold season. This means that it provides thermal insulation, which was not mentioned above. And the heat source itself for heating must also be provided.

Glass is not the best heat insulator, so you need to install either double-glazed windows suitable for your climate, or not use this room in winter.

In general, construction companies offer two glazing options - summer (cold) and winter (insulated). Accordingly, the customer only needs to decide whether he will spend winter evenings on this veranda or not.

Red brick bathhouse with a workshop, garage, boiler room, open and closed (glazed) terrace. Teplokrepost Photos

The most beautiful – frameless – design is at the same time the most expensive and not suitable for winter.

If you choose aluminum, which, by the way, is also cold, it will be offered in two versions - hinged and sliding. It is also the cheapest.

Warm glazing is possible, as already mentioned, with double-glazed windows. That is, metal-plastic. It is an order of magnitude more expensive than aluminum. Suitable metal-plastic doors will be offered to you there.

In addition to the hinged metal-plastic version, there is a sliding version, but it is extremely cold, and this is a product of companies specially designed for it. We do not advertise anything, so we suggest you search on the Internet yourself if you want a sliding type of glazing.

Bathhouse with a glass veranda: pros and cons

Briefly about the advantages and disadvantages of baths with glazed verandas.

The cold type of glazing will probably be good where summer is often cold and rainy. In general, verandas act as a transition from home to nature, a “buffer zone” where you can sit comfortably under the roof, the air is fresh, and nature is not behind glass. So, with glazing it will be behind glass. Even behind sliding panels.

The insulated version is prettier and more expensive. You can generally combine a relaxation room with a fireplace and such a veranda - you will get a large room, but if the view behind the glass is not particularly impressive, then it is unnecessary to spend money on such a pleasure.

Bathhouse with a closed (glazed) terrace and summer kitchen. Teplokrepost Photos

In general, a glassed-in porch is good where there is something to look at.

In addition, the question arises with the doors - what kind should they be made of? In principle, a door made of metal-plastic can be quite reliable, they are even installed for residential buildings, but where to place it is up to you. If the terrace is equipped as a warm rest room, then it is better to enter from the street; if the glazing is cold, then it is better to place the entrance door on the interior premises. We also recommend reading our material about entrance doors for bathhouses.

Additional premises

In the developing world, bathhouses have also developed. Now, from a place for swimming, they have turned into an equipped place for relaxation and communication. Pairs built according to a template are a thing of the past. Now the steam room door may well go not directly into the locker room, but into one of the many rooms of the bathhouse. Often additional rooms are added to a finished bathhouse. This allows you to save a lot of money. After all, buildings that are lighter than the main structure do not require a solid foundation. A light base is sufficient for them.

Terrace

This is an open space near the main building with or without fencing.
They are wildly popular. A terrace is a great solution for a place where you can enjoy your holiday. The roof of the bathhouse and veranda may be common.

It may be a polycarbonate canopy, or absent altogether.

This does not at all affect the possibility of using the terrace as a summer cafe.

You can improve the building with a green fence. This will provide additional protection from the wind and scorching sun.

A decorative fountain can be placed nearby. It is better to think through the extension itself in advance, at the stage of creating the project. With proper planning, it will help to use the internal space more efficiently. You can place the terrace on the second floor. The downside will be installing a staircase to the second floor, which will take up a lot of space. But for a large bathhouse this, of course, will not play a significant role. The most popular models will be terraces:

1. Raised above the ground, decorated with carved wooden parapets;
2. Tents;
3. Entirely made of glass;
4. Classic, in the form of an extension to a bathhouse.

Veranda

An open or closed unheated room, which distinguishes it from a terrace. The terrace is a mandatory covered canopy, most often protecting only from rain. The functional purpose of the buildings is different - the veranda is used not only for relaxation in the summer. It can also be a kitchen, bedroom or dining room.

B-B-Q

A barbecue is a metal grill for cooking meat over an open fire.
Creating a veranda with a barbecue requires certain design features. First of all, in the place where the furnace will be built, the foundation is strengthened.

Its height should be equal to the height of the floor on the veranda. Installing the barbecue simplifies everything.

Its location is simply covered with fire-retardant material.

In both the first and second cases, a special hood is made - a hood, to remove smoke and heat. It is possible to install a ventilation system. The advantages of this solution:

1. The appearance of a summer kitchen;
2. Speed ​​of preparation;
3. Convenience, spaciousness;
4. Delicious, healthy food.

Refractory bricks are used to build a barbecue oven. The height of the roasting pan is about 70cm. Stone tiles are laid around it. In the front wall you can make a small recess, a niche for firewood. With the addition of additional barbecue space, the size of the other rooms in the bathhouse is reduced. If you want to enjoy flavorful dishes all year round, consider installing a heating system on your veranda with barbecue.

Information. If you are attaching a barbecue area to a finished bathhouse, make the foundation of the extension a little higher so that there is no subsidence or distortion.

Barbecue can be prepared in a gazebo not adjacent to the bathhouse. Then both buildings are connected by a closed passage.

Important! Be extremely careful when starting a fire! For construction, use materials that are resistant to heat: stone, brick.

Non-standard with swimming pool

When the hot air makes you uncomfortable, you can always use the pool. Water will give you a boost of energy and refreshment. The solution will not be cheap. There are several types of pools:

1. Tanks built into the floor (they are a reinforced concrete bowl installed on a foundation in a specially dug hole);
2. Mobile structures (made of PVC, reasonable price, simple and easy installation);
3. Spa massage (hydromassage pools, compact size, sold only ready-made, intended for relaxation only).

To determine what kind of pool you need, consider:

1. About its location;
2. How many swimmers is it designed for?
3. What shape will the bowl be?

Building a swimming pool in a bathhouse is a labor-intensive and costly task. You will definitely need to develop a project with drawings and calculations. The coefficient of concrete, which is responsible for water absorption, is also taken into account. To comply with all the technical features will require a lot of time and the help of specialists.

Preparing piles for the foundation

Normal operating conditions for a wooden terrace can only be created by insulating the wood from excessive exposure to moisture. To do this, the platform must be slightly raised above the ground so that water does not accumulate under it (for more details: “Building a bathhouse on stilts with your own hands - from the foundation to the roof”).

In this regard, a pile or columnar foundation is used with preliminary treatment of the soil under the site:

1. The fertile layer of soil is removed.
2. Then the remaining soil is leveled and compacted.
3. A crushed stone-sand cushion is poured and compacted on top of it.

Only in this case will various plants not germinate, die and rot under the terrace, which will ultimately lead to the appearance of an unpleasant odor and spore formation.

Problems with gas blocks

We will now figure out how to deal with this, but there is one condition - if we still choose aerated concrete for a bathhouse, experts strongly do not recommend painting or covering the outside of the wall with plaster. This will inevitably lead to the formation of excess moisture in the structure of the material, and the consequences of this can be the most unpredictable.

Another indispensable condition for building a bathhouse using this method is careful waterproofing of the inner surface of the walls. The situation is somewhat simplified by the fact that aerated concrete has excellent heat-saving properties, so you won’t have to put much effort on thermal insulation, but you need to take care of waterproofing.

Laying the foundation

Despite often having a common roof, different foundations are laid for the terrace and bathhouse. A bathhouse, naturally, is heavier than a terrace, so for large and multi-story buildings you will need a strip monolithic foundation, and for small bathhouses you can get by with a pile foundation. If foam concrete or brick is used to build a bathhouse, then a strip foundation must be poured - another simply will not support the weight of the building.

For a wooden terrace, a pile foundation will be quite sufficient. In cases where the terrace will be located on difficult soil, prone to freezing or crumbling, on slopes, then to increase reliability it is better to lay screw piles

At the same time, for wooden buildings it is very important to properly organize waterproofing between the tree and the foundation in order to avoid rotting of the wood

An important stage in the construction of a bathhouse is laying the foundation

Location of the building

To locate the bathhouse, you need to choose the right place, taking into account a number of factors:

• It would be more correct that, taking into account the prevailing wind direction, the bathhouse should be the last in the line of buildings. If it suddenly catches fire, in this case there will be a high probability that the fire will not spread to other buildings.
• If the bathhouse and the residential building are built as separate objects, the distance between them must be at least eight meters. The reasons here are the same as in the previous case.
• It is advisable to locate the bathhouse away from the road. Even according to the requirements of the Land Code, this distance should not be less than five meters.

The terrace in its structure is an extension to the main building. In addition to the roof combined with the bathhouse, it can be protected from the wind to a certain extent, since it has one common wall with the main building and conditional partitions around the perimeter.

A solid floor is installed near the summer terrace. It can be made of wood, sometimes it is laid out with tiles or some other finishing materials. Furniture on this site includes benches, chairs, rocking chairs, and a dining table.

A terrace is usually made along the entire facade of the bathhouse. This is convenient not only in terms of construction, but also in everyday life. It’s good to come out of the steam room to such an equipped place; here you can cook and dine.

Subtleties of design

When designing construction, it is best to immediately plan the construction of a gazebo. This will help save materials and time, conveniently connect the roofs of two sections of the building and provide for any design features.

It is imperative to provide for the possibility of converting an open type extension into a closed one. After the first season of use, it may turn out that it is comfortable to sit on the open veranda only on hot days. It is best to immediately design a universal extension with removable or sliding panels made of transparent materials (glass, polycarbonate). For permanent residence, the gazebo is made all-season. In central Russia, it is advisable to build an extension closed on all sides with large panoramic windows.

Accommodation options

There are no special rules for placing gazebos near bathhouses. The owner builds this structure taking into account general sanitary standards and fire safety breaks. The most convenient option is a gazebo extension facing the sunny side: it can be used as a solarium. But for such a room it is advisable to make sliding walls so that the closed room does not become stuffy inside. In cold weather, it will be warm due to solar heat, you just have to close the openings.

Depending on the wishes of the owners, the gazebo can be made as an extension, under a single roof. But some will like a free-standing structure with a covered walkway

Features of choosing coal fuel: stone, wood, brown, anthracite

For successful operation of the device, several types of coal are used:

​

• Stone - has a black color, hard to the touch, and crumbles easily. Its humidity is 11-15%, heat transfer is 5 thousand kcal/kg. It is poured into the firebox in a layer of 12-18 cm, suitable for all types of devices.
• Wood - has a shiny black color with a blue tint, humidity 7-15%, heat transfer 7.5-8.1 thousand kcal/kg.
• Brown - has a light brown color, humidity up to 40%, heat transfer in the region of 3.5-5.5 thousand kcal/kg. Universal, suitable for all types of heaters. Its disadvantage is the presence of harmful impurities.
• Anthracite is the oldest type of coal, humidity 7%, heat transfer up to 9 thousand kcal/kg. Due to the high combustion temperature, it is only suitable for devices with specially reinforced combustion chamber walls. This is the most expensive type of fuel.

During operation, it is better to pre-sieve the coal so that no dust remains in it. Then gaps will form between the pieces, improving air convection, and the burnt dust will not form soot deposits on the walls of the firebox and chimney.

Construction principles

Project

Corner bath project

The corner bath project is no more difficult to implement than the construction of a standard rectangular building. It should also be noted that the construction of such objects provides for the possibility of using building materials with a shorter length than, for example, a traditional 5x5 object.

As a result, the longest walls can be built using long timber or rounded logs, while the remaining lumber will be used for smaller walls. As a result, choosing a project with a corner configuration allows you to avoid overuse of building materials and thereby reduce the cost of the finished structure.

Choosing material

The optimal material for the construction of corner baths is profiled timber or rounded logs.

Rounded logs of various sizes

The use of such materials guarantees the following advantages:

• Reducing labor costs and saving time, since such materials are pre-adapted for construction work, which cannot be said about conventional edged timber, which requires additional processing.
• Affordable price.
• Low thermal conductivity of walls due to the high-quality connection of profiled timber using the “tenon-to-groove” type.
• Minimal shrinkage of walls during drying.
• Minimum degree of cracking of timber due to the negative impact of environmental factors.
• Optimal aesthetic qualities of the finished building.

Timber storage