TOP 10 best electric stoves for a bath: 2022 rating and which device to choose for heating a steam room

The sauna stove is the “heart” of the sauna.

The choice of such devices is varied.

Many people cannot imagine being in a steam room without the aroma of burning wood.

But for comfort and functionality, you should choose a stove that runs on electricity.

It does not create smoke.

Does not require constant cleaning, is lightweight and takes up little space.

On smartphones, you can scroll the table right/left ↔

Rating of the TOP 10 best electric stoves for baths 2020-2021

Rules for safe use

The following simple recommendations will help you avoid unpleasant situations, leaving only positive impressions from the bath procedure:

• accuracy and caution when supplying water to the heater will avoid burns from hot steam;
• Do not cover the electric oven with any objects or materials;
• It is forbidden to leave children alone in the steam room without adult supervision;
• ensure proper air circulation near the furnace equipment;
• It is not recommended to visit the bathhouse while intoxicated or if you feel unwell;
• Pregnant women and children under six years of age are advised to obtain prior consultation with a doctor regarding the bath procedure;
• choose the optimal heating mode for the steam room; do not set the maximum temperature: it should be comfortable for you, otherwise a session spent in the bathhouse will not improve your health, but, on the contrary, will lead to dire consequences;
• It is prohibited to use equipment that contains defects or malfunctions;
• when carrying out aromatherapy, you must use only those oils that are recommended for the procedure in a bath or sauna;
• To clean the furnace unit, use appropriate products; remember that abrasive substances are prohibited;
• the temperature sensor must always be open;
• try not to use sea water or other water with a high content of chlorine and salt: this can cause corrosion of metal surfaces.

How to choose and what to pay attention to?

When buying an electric sauna stove, pay attention to the following criteria:

1. Preliminary calculation of steam room volume . Determines the required power. For 1 cubic meter of steam room there should be 1 kW of power. This calculation is approximate, but with its help the buyer can determine the choice of electric stove of the required performance.
2. Furnace controls . The wiring must be able to withstand the load. Some models cannot operate on a 220 W network; they must be connected to 380 W. Please consider this point when purchasing.
3. View of the heating circuit . For a home steam room, you can choose a heating element, but it is better if it is made of stainless steel - this will extend the service life of the electric furnace.
4. Design . Depending on the size of the room, you can choose the type of device: wall-mounted, floor-mounted or mixed type. It is better to equip small steam rooms with a wall-mounted stove; it saves space.
5. Availability of a certificate of product conformity to Russian standards . Please pay attention to the presence of a valid safety certificate for the stove and the materials from which it is made.

Power calculation

It is easier to calculate the power of an electric stove than a wood stove. The manufacturer indicates the power in kilowatts in the passport. The consumer can only determine the volume of his steam room in order to get his bearings. But! There is a formal volume, and there is an adjusted volume after adding coefficients - for example, for surfaces without thermal insulation, for heating adjacent rooms in winter, etc.
So, tiles, glass, stone - you need to calculate their surface area, multiply by 1.2 and add to the formal volume.

the glass door to the steam room separately - just add an extra one and a half cubes to the existing numbers.

Then it’s simple: for one kilowatt of stove power - one cubic meter of steam room space, if the stove has heating elements , and one and a half cubic meters if there are tape heaters .

The best electric sauna stoves

Sawo Mini X MX-36NS-Z

Electric sauna stove of hanging type, power 3.6 kW . Operates on 220 and 380 network

Tue

Heats up to 6 cubic meters. The body is made of durable steel, galvanized inside, and has a light weight of 8 kilograms.

Compact sizes are ideal for placement in tight spaces . You can separately purchase a remote control panel that allows you to adjust the indicators from a distance.

The housing does not heat up to high temperatures, the room is heated quickly and evenly, even in the corners of the steam room.

The declared volume warms up in 15-20 minutes.

It features low energy consumption and is available in white color . The work proceeds silently. The manufacturer provides three years of official warranty.

Main characteristics:

1. What volume does it heat? 6 m3.
2. Power - 3.6 kW.
3. The body is steel.
4. Dimensions - 50x33x24 cm.

pros

• compactness and lightness;
• efficiency;
• economical energy consumption.

Minuses

• not detected.

Sawo Scandia SCA-45NS-Z

Snow-white hanging electric stove for baths and saunas, power 4.5 kW.

Heats up to 6 cubic meters.

The body is made of steel and does not become very hot during operation..

Galvanized inside. This distribution of materials allows you to reduce the cost of the device without losing its service life. Operates from a 380 W network.

A remote control panel can be purchased separately . The panel is located on the side, with its help you can set the parameters of power, temperature, and late switching on. The stove's heater can hold up to 22 kg of stones.

The air heats up quickly and evenly, without strong dry heat . The specified volume is heated in 20 minutes.

It is characterized by low price and economical energy consumption. The manufacturer provides three years of official warranty.

Main characteristics:

1. What volume does it heat? 6 m3.
2. Power - 4.5 kW.
3. The body is steel.
4. Dimensions - 45x41x29 cm.

pros

• stylish design in the style of Scandinavian minimalism;
• energy consumption class;
• fast and uniform heating.

Minuses

• To use the modes, you need to buy a thermostat.

Sawo MINI MN-23NB-Z

Electric hanging stove for small steam rooms . The furnace power is 2.3 kW,

heats up to 3 cubic meters. The light stainless steel body does not heat up during use.

Operates from a network of 220 and 380 W.

The heater can hold up to 9 kilograms of stones. The casing and upper grill are also made of stainless steel.

It takes no more than 10 minutes to heat up the specified volume, while oxygen is not burned out and the heat is distributed evenly.

The controls are simple and the work is silent. The control panel is located on the side, which is convenient in terms of saving space.

Compact dimensions allow you to easily place the device in tight spaces.

The remote control panel, which is purchased separately, is designed to adjust parameters without the need to enter a hot room.

Main characteristics:

1. What volume does it heat? 3 m3.
2. Power - 2.3 kW.
3. The body is steel.
4. Dimensions - 45x43.5x21 cm.

pros

• economical energy consumption;
• convenient control;
• fast heating.

Minuses

• no deficiencies identified.

Sawo Aries ARI3-45NB-P

Floor-standing electric sauna stove with a total weight of 60 kg . Placed on stable

legs that do not allow movement or accidental tipping.

Despite the high design of the heater, the stove itself stands well and does not wobble. It has a power of 4.5 kW and heats up to 6 cubic meters.

You can use the remote control to control modes remotely . The body is made of stainless steel, as is the grill of the heater. Open type heater. There is an adjustment of heating power.

Hot air is distributed evenly throughout the room, without bypassing the corners . It features economical energy consumption. The specified volume heats up in 20-30 minutes.

Adjustment can be made not only through the remote control, but also through two rotary switches on the body.

There is a timer and thermostat.

Main characteristics:

1. What volume does it heat? 6 m3.
2. Power - 4.5 kW.
3. The body is steel.
4. Dimensions - 93x30x30 cm.

pros

• official Finnish guarantee;
• simple control of switches or via remote control;
• installed timer and thermostat;
• economical energy consumption.

Minuses

• The remote control is not included.

Sawo ARIES ARI3-90NB-P

Floor-standing electric sauna stove with a total weight of 13 kg, which allows you to freely move the device from place to place.

Placed on stable legs that prevent movement or accidental tipping. It has a power of 9 kW and heats up to 14 cubic meters. Operates from a 220 W network.

You can use a remote control to control modes, which is purchased separately.

The body is made of stainless steel, as is the grill of the heater. Open type heater, holds up to 50 kg. There is an adjustment of heating power.

Hot air is distributed evenly throughout the room, without bypassing the corners . It features economical energy consumption.

The specified volume heats up in 20-30 minutes . Adjustment can be made not only through the remote control, but also through two rotary switches on the body. There is a timer and thermostat.

Main characteristics:

1. What volume does it heat? 14 m3.
2. Power - 9 kW.
3. The body is steel.
4. Dimensions - 92.5x27.5x27.5 cm.

pros

• economical energy consumption;
• control of both switches and remote control;
• fast and uniform heating;
• a light weight.

Minuses

• The remote control is not included.

Sawo Scandia SCA-90NB-Z

Another model of an electric floor oven . A power of 9 kW is enough to heat 14

cubic meters. The case is made of stainless steel. The heater can hold up to 20 kilograms.

Operates on 380 W network.

The housing houses a control panel with manual (rotary) controls. They do not deform from high temperatures.

The grille is made of stainless steel and galvanized inside . This ensures a long service life, protecting the housing from early deformation. High temperature and humidity do not affect the operation of the device.

Warming up is fast and uniform, the oven does not burn oxygen . Small dimensions and economical energy consumption make this model even more attractive.

Main characteristics:

1. What volume does it heat? 14 m3.
2. Power - 9 kW.
3. The body is steel.
4. Dimensions - 52x51.5x29 cm.

pros

• Finnish quality and official guarantee;
• convenient control;
• fast and uniform heating.

Minuses

• cannot be connected to a 220 network.

Sawo Nordex Mini NRMN-36NB-Z

Another model of a hanging electric stove for small steam rooms . Device power

is 3.5 kW, this is enough to heat 6 cubic meters. Operates from a network of 220 and 380 W.

The body, casing and upper grill are made of stainless steel, galvanized inside . Made in light gray color, the body does not heat up.

The heater can hold up to 11 kilograms of stones . Control is carried out using two rotary switches located on the body.

Installation is easy, compact dimensions allow you to easily place the stove in modest room sizes.

It copes with heating quickly, evenly distributing heat at the specified volume in 10-15 minutes. Doesn't burn oxygen.

Main characteristics:

1. What volume does it heat? 6 m3.
2. Power - 3.5 kW.
3. The body is steel.
4. Dimensions - 49.5x34x20 cm.

pros

• compactness;
• fast and uniform heating;
• simple mechanical control.

Minuses

• not found.

Harvia Vega BC60

Compact and lightweight (only 11 kg) hanging electric sauna stove with a power of 6 kW, for heating 8 cubic meters.

The outer casing and firebox are made of stainless steel. During operation, the housing does not become hot.

Mechanical control, two convenient rotary switches located on the front side of the outer housing.

The heater can hold up to 11 kilograms of stones. Heating occurs quickly, heat is distributed evenly.

Operates from a network of 220 and 380 W. There is a turn-on timer and a built-in thermostat. The oven is designed for a long service life and is not afraid of high temperatures and humidity.

Main characteristics:

1. What volume does it heat? 8 m3.
2. Power - 6 kW.
3. The body is steel.
4. Dimensions -54x48x31 cm.

pros

• built-in timer and thermostat;
• simple mechanical control;
• fast and uniform heating.

Minuses

• there is no possibility to control remotely.

Harvia Moderna V80E

Lightweight electric sauna stove with a power of 8 kW . Heats up to 12 cubic meters.

Can be placed on the floor or hung on the wall. Operates from a 220 network, there is a possibility of remote control.

This allows you to adjust power, temperature and operating time without entering a hot steam room ahead of time.

The heater can hold up to 20 kg of stones. A temperature sensor is installed, the maximum temperature is 110 degrees.

The oven is adapted for eight hours of continuous operation . There is an electronic control panel on the side. The connecting cable is 3.5 meters long, which allows the device to be moved freely.

Main characteristics:

1. What volume does it heat? 12 m3.
2. Power - 8 kW.
3. The body is steel.
4. Dimensions - 58x41x31 cm.

pros

• timer and thermostat;
• electronic or remote control;
• 8 hours of continuous operation.

Minuses

• When the voltage is low, the control is disabled.

Harvia KIP90

Hanging model of an electric sauna stove . The power of the device is 9 kW, this

enough to heat 14 cubic meters.

Operates on 220 W network . The outer casing is made of stainless steel.

The heater can hold up to 25 kg of stones. The oven is compact in size. Easily fits into small steam rooms and saunas.

Heating of the room occurs quickly, the heat is distributed evenly, without bypassing the corners . Doesn't burn oxygen. The specified volume warms up in 10-20 minutes. Designed for 4 hours of continuous operation.

The control is mechanical, carried out by two rotary switches located at the bottom on the front side of the case.

They are protected from high temperatures and humidity.

Main characteristics:

1. What volume does it heat? 14 m3.
2. Power - 9 kW.
3. The body is steel.
4. Dimensions - 60x41x28 cm.

pros

• simple mechanical control;
• fast and uniform heating;
• economical energy consumption.

Minuses

• not found.

Description of electric furnaces

The rate of heating of the room is largely determined by the number of stones loaded into the heater.

Kinds

1. Models that involve laying a significant mass of stone require more time to heat up . The heat emitted by them is more uniform and soft. You can pour water onto such devices; it evaporates before reaching the heating elements. The atmosphere is close to a classic Russian bathhouse. There is another operating mode - “sauna”. To power such ovens, a 380 V power source is required.
2. Electric ovens designed to load a small amount of stones quickly heat up the steam room . You can pour water on them in small quantities and infrequently, waiting for the optimal heating temperature. Such devices are more often used in saunas, since this mode of operation contributes to their long-term operation. Installation is possible even in an apartment, powered from a regular network.
3. Thermos stoves . They have a closed type of housing with a lid at the top of the device covering the container with heated stones. With the lid open, it will become warm within a few minutes. The steam generated is quite fine and hot, like in a Russian bath.
4. Steam generators . Ideal for creating a high level of humidity in the steam room. But the air turns out to be difficult to breathe, which is why the popularity of such equipment is not very high.
5. Electric furnaces equipped with a steam generator . They have a separate container for water. Just like steam generators, they produce very moist steam.

It is possible to use an electric furnace and a steam generator together to produce high-quality, dry steam . For this purpose, moist air from the steam generator is supplied to the bottom of the heater, where it is dried and heated to the required values.

Device and principle of operation

The design of the electric furnace is not particularly complicated.

Its components:

• double-walled metal body;
• electrical heating elements - heating elements or tape type;
• heat-insulating material - steel screens located one behind the other and protecting the walls of the bathhouse from excess heat;
• cage for stones.

The rate of heating of the room depends on the mass and size of the latter . When using heavy stones of significant size, the bath will heat up faster.

The stove stove can be open or closed . The first option is more popular, since it allows not only to heat the steam room efficiently, but also to obtain steam with optimal humidity.

Closed sauna stoves can be a closed structure of a vertical or horizontal type, consisting of:

• heating element;
• conductor of electric current;
• surface that reflects the generated heat.

When the device is turned on, the heating elements begin to produce heat, from which the stones inside are heated, gradually increasing the temperature inside the bathhouse.

NOTE!

To regulate the humidity level, warm water is poured over the stones, which turns into fine steam.

Peculiarities

1. To connect the electric heater to a power source, you may need to install a separate power supply line . It is recommended to lay wires with a large cross-section (4-8 millimeters), which are heat-resistant. The wire connected to the electric meter is first connected to the RCD, and only after that the device can be used.
2. Warming up the room at maximum power can last from 30 to 120 minutes . The time period depends on the selected furnace power indicators and the quality of its thermal insulation. When the required temperature level is reached, the power of the device will need to be reduced by 1.5-2 times. Adjustment can be made in manual and automatic modes (if there is a built-in thermostat).
3. When choosing an electric heater, you should take into account the presence of additional safety requirements . The constant supply of air from outside will increase energy consumption. Insufficient oxygen supply can cause fainting or general deterioration in health. To prevent such problems, it is necessary to equip a ventilation gap under the door, at least two centimeters, or install deflector grilles at the bottom of the door, through which fresh air will flow into the steam room. Natural convection of air masses will allow the heat to be evenly distributed in the room.

Types of electric sauna stoves

Electric sauna stoves come in several types: wall-mounted, stationary and mixed..

The former are distinguished by their light weight and extremely compact dimensions; such stoves are used in small steam rooms in order to save space. Stationary ones are heavier and larger, hold 20 kg of stones and are suitable for large steam rooms.

Mixed electronic ovens can be hung on the wall or placed on the floor . They are light, compact and in terms of power they are inferior to stationary models.

Most often used in steam rooms with a volume of up to 10 cubic meters.

In addition, electric furnaces are divided according to the type of heating element:

1. Heating element heater , which has a limited resource, especially with frequent use.
2. Band heating . It is considered the safest and most economical option in terms of energy consumption.
3. Mixed heating . Such models combine both types of heating element. The tape increases the speed of kindling and reduces the load on the heating element, extending its service life.

Distinctive features

The electric furnace is designed for heating premises and organizing hot water supply . The design consists of a double housing, heating elements and thermal insulation.

The main element is the heater. It is installed inside, and a cage for heating the stones is mounted on top. The characteristics of the furnace determine what the maximum temperature will be and how long it will remain.

The outside of the case is equipped with metal plates up to 3.5 mm wide to create ventilation gaps that promote safe cooling of the device.

Metal screens are used for thermal insulation. They protect the wooden surface from overheating and fire.

In private baths, open and closed stoves are installed. Open electric heaters are the most popular because they provide the fastest heating of the steam room and production of steam.

Such devices are equipped with a wire thread, which is mounted in a stand and acts as a heating base..

The heating element allows you to reach the desired temperature in a certain time, and also ensures the stove’s resistance to long-term cyclic loads.

IMPORTANT!

The speed and quality of heating depends on the type of heater.

Types of heating elements:

1. Heating element (tubular) . Heats up quickly, but is not the most reliable device. It is the rapid heating rate that shortens the life of the part. The heating element can be enclosed in a stainless steel housing and increase the working life of the device. In this case, the cost of the unit is higher.
2. Tape . Heats up quickly. Operates at low temperatures, burning a small amount of oxygen. This creates a comfortable microclimate in the steam room. But this same property prevents the room from quickly heating up.
3. Combined . It is a combination of a tubular and tape heating element in one device. This allows you to achieve maximum effect when working. The combination allows you to quickly achieve a high temperature at the initial stage of heating the air. When the tape heater is running, the heating element operates in a gentle mode. This increases the wear resistance of the device. A stove with a combined heating element fails less often, but it also costs more.

Advantages and disadvantages of electric sauna stoves

The advantages of electric furnaces are considered:

• quickly heats the room and maintains a constant temperature;
• small size;
• You can install the device yourself;
• operation from a network of 220 or 380 W helps to eliminate fuel reserves;
• no need to build a smoke exhaust duct;
• no need to remove soot or carry out any maintenance activities;
• easy to adjust temperature;
• protection against severe overheating;
• does not emit carbon dioxide, is the safest, unlike gas or wood-burning devices;
• has good thermal protection.

The disadvantages of such models include:

• high cost of maintenance, the price of electricity with frequent use can hit your pocket hard;
• the wiring resource may not be sufficient if the network is configured for a lower consumed load;
• heat dissipation is lower than that of gas or wood-burning models.

Switching on the equipment for the first time

Before starting the oven for the first time, check the following points:

• correctness and reliability of installation of the structure;
• network connection;
• placement of stones as required by the instructions;
• presence of a control panel, its serviceability;
• The temperature sensor is in place and connected in accordance with the manufacturer's requirements.

Having completed these steps, we proceed to the beginning of work: turn on the oven with the main switch, which is most often located below. We set the temperature (for the first time it’s +50) and leave the oven for an hour. After this time, we stop the device. During operation, it is recommended to monitor the equipment and its condition.

When you turn it on for the first time, a foreign smell may appear, which is not considered a deviation from the norm: it will quickly pass. If you find a similar defect the next time you turn it on, this already indicates the need to contact service.

Criteria for choosing an electric heater

When planning the arrangement of a sauna or bathhouse, you should pay attention to proper ventilation and purchase a suitable model of electric heater. First of all, before purchasing, it is important to decide on the type of installation of the equipment - this is what you should start from when choosing a stove.

Installation type and shape of the electric heater

In a small room, it is better to place a wall-mounted device or a floor-standing unit in the shape of a tall, narrowed cylinder. They will not overload the interior and will not “eat up” the usable area of ​​the room.

For large steam rooms, any variety of models is suitable.

The outer body of the furnace can be open or closed. The first one stores valuable heat inside longer and releases moist steam, while the second one quickly warms up the room and makes the air as dry as possible.

Oven power and brand

Furnace power is one of the most important parameters. It is calculated based on the area of ​​the steam room. Nominally, 1-1.5 kW is required to warm up 1 cubic meter.

It is better to buy a device with some reserve. Then it will normally withstand the operating load and work for the entire period promised by the manufacturer.

But when choosing the power of the equipment, do not forget about your wiring - to connect a powerful electric furnace, you should allocate a separate line, and if the house has old wiring, then you need to make sure that its cross-section will be sufficient for the model you like.

It is also worth paying close attention to the size of the internal chamber for stones. For small saunas and baths, a volume of 20-26 kg is enough. For large double rooms, it is worth purchasing models with a capacity above 50 kg.

If the sauna/bathhouse has poor-quality thermal insulation and thin load-bearing walls, it is advisable to buy an electric heater with a large power reserve. Otherwise, you won’t be able to steam with pleasure. A weak model will physically not be able to cover current heat losses

The manufacturer's brand also matters. Devices from European brands are traditionally considered to be of higher quality, but are sold at a higher price.

Domestic and Chinese models are cheaper. It is among them that you can find technologically simple, but high-quality and reliable budget stoves for household use.